Model-Based Diagnosis Test for Condition-Based Maintenance of Electrical High Power Switches

  1. Alonso Gil, Juan Miguel 1
  2. de la Torre, Eduardo Moya 1
  3. de Miguel, Luis Javier 1
  1. 1 Universidad de Valladolid
    info
    Universidad de Valladolid

    Valladolid, España

    ROR https://ror.org/01fvbaw18

    Localització geogràfica de l'organització Universidad de Valladolid
Revista:
IFAC Proceedings Volumes

ISSN: 1474-6670

Any de publicació: 1997

Volum: 30

Número: 18

Pàgines: 931-936

Tipus: Article

DOI: 10.1016/S1474-6670(17)42519-5 GOOGLE SCHOLAR lock_openAccés obert editor

Altres publicacions en: IFAC Proceedings Volumes

Resum

This paper describes a new test used in switch maintenance. The electrical distribution systems must be highly reliable. An endless supply must be assured, so the electrical switchgear maintenance requires high priority. The switches themselves are not the most important pieces of the distribution system but they must protect, or prevent damage of other components such as transformers.We propose a new electric test for these switchgears. The test is based on the analysis of the transient response of the switch to controlled cut-offs. Familiarisation with the switch-model allows to apply to a model-based diagnosis, but complete model of those systems are quite difficult to obtain. The implementation of the test will reduce the maintenance cost by the use of a condition-based maintenance of the switch.

Referències bibliogràfiques

  • Basseville, (1993)
  • Browne, (1980), Theory and Design
  • (1994), Course of switchgear
  • Iserman, (1984), Automatic, 20, pp. 387, 10.1016/0005-1098(84)90098-0
  • Kito, (1980), IEEE Trans. Plasma Science, PS-8, pp. 208
  • Nakamichi, (1983), PAS 102, pp. 586
  • (1989)
  • Reinhold, (1980), Transient performance of electric power system
  • (1996), Reference Book. Learning TestPoint, 1
  • Verité, (1995), IEEE Proc.-Sci. Meas. Technol., 142, pp. 189, 10.1049/ip-smt:19951781