Experimental study of the effect of nozzle geometry on the performance of direct-injection diesel sprays for three different fuels

Abstract

This thesis studies the influence of internal nozzle flow characteristics over a large spectrum of experimental conditions and diagnostics. Experiments were carried out for two nozzle geometries---cylindrical and conical single hole nozzles---and three different fuels. Two of the fuels are pure components---n-heptane and n-dodecane---while the third fuel consists of a three-component surrogate to better represent the physical and chemical properties of diesel fuel. Measurements include a complete hydraulic characterization consisting of instantaneous injection rate and spray momentum flux measurements; a high-speed visualization of isothermal liquid spray; a high-speed visualization of the evaporative inert spray, imaging liquid and vapor phases simultaneously and finally, a high-speed visualization of the high temperature reactive spray, imaging vapor phase and OH* chemiluminescence for each injection event. All high-temperature diagnostics were performed in a continuous flow test chamber that allows an accurate control on a wide range of thermodynamic conditions (up to 1000 K and 15 MPa). The experimental findings from this work, and the large database obtained (available for download at: http://www.cmt.upv.es/DD01.aspx), could be used to validate CFD models that could help the community understand the fundamental driving mechanisms behind these observations.