Ciencia e Ingeniería de los Materiales y del Estado Sólido (CIMES)
![Foto de Ciencia e Ingeniería de los Materiales y del Estado Sólido (CIMES)](/img/uploaded/E047A4AFB3DCEB503667AA7DEE30D560.png)
![Foto de Universitat Politècnica de Catalunya](/img/noimage_org.png)
Universitat Politècnica de Catalunya
Barcelona, EspañaPublicacions en col·laboració amb investigadors/es de Universitat Politècnica de Catalunya (35)
2018
2017
-
Effects of hydrothermal aging on the water uptake and tensile properties of PHB/flax fabric biocomposites
Polymer Degradation and Stability, Vol. 142, pp. 129-138
2016
-
Effect of chain extender and water-quenching on the properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) foams for its production by extrusion foaming
European Polymer Journal, Vol. 85, pp. 14-25
-
Effects of wet/dry-cycling and plasma treatments on the properties of flax nonwovens intended for composite reinforcing
Materials, Vol. 9, Núm. 2, pp. 1-18
-
Low density polyethylene/silica nanocomposite foams. Relationship between chemical composition, particle dispersion, cellular structure and physical properties
European Polymer Journal, Vol. 81, pp. 173-185
2015
-
Cellular structure and mechanical properties of starch-based foamed blocks reinforced with natural fibers and produced by microwave heating
Industrial Crops and Products, Vol. 66, pp. 194-205
2014
-
Strategies to improve the mechanical properties of starch-based materials: Plasticization and natural fibers reinforcement
Polimeros, Vol. 24, Núm. SPEC. ISSUE, pp. 36-42
2013
-
Influence of foaming process on the structure-properties relationship of foamed LDPE/silica nanocomposites
Composites Part B: Engineering, Vol. 48, pp. 40-50
2012
-
Foaming behavior, cellular structure and physical properties of polybenzoxazine foams
Polymers for Advanced Technologies, Vol. 23, Núm. 5, pp. 841-849
-
Moulded polypropylene foams produced using chemical or physical blowing agents: Structure-properties relationship
Journal of Materials Science, Vol. 47, Núm. 15, pp. 5680-5692
-
Optical expandometry: A technique to analyze the expansion kinetics of chemically blown thermoplastic foams
Journal of Applied Polymer Science, Vol. 125, Núm. 2, pp. 1059-1067
-
Thermal conductivity anisotropy in polypropylene foams prepared by supercritical CO 2 dissolution
Materials Chemistry and Physics, Vol. 136, Núm. 1, pp. 268-276
2011
-
Development of starch biobased and biodegradable plastics for their use in trays for food-packaging
Society of Plastics Engineers - EUROTEC 2011 Conference Proceedings
-
Electrical conductivity and mechanical properties of vapor-grown carbon nanofibers/trifunctional epoxy composites prepared by direct mixing
Composites Part B: Engineering, Vol. 42, Núm. 4, pp. 675-681
-
Heat transfer in polyolefin foams
Advanced Structured Materials, Vol. 2, pp. 131-161
2010
-
Foaming behavior, structure and physical properties of a novel benzoxazine resin
Society of Plastics Engineers - FOAMS 2010, 8th International Conference on Foam Materials and Technology
-
Heat transfer of mineral-filled polypropylene foams
Defect and Diffusion Forum
-
Structure and properties of Polypropylene/Hydrotalcite nanocomposites
Polymer Composites, Vol. 31, Núm. 5, pp. 870-878
-
The effect of anionic clay particles on the structure and thermomechanical behavior of sodium partially- Neutralized EMAA ionomer
Journal of Applied Polymer Science, Vol. 116, Núm. 5, pp. 2573-2579
-
Thermal conductivity of carbon nanofibre-polypropylene composite foams
Defect and Diffusion Forum