Publicacións nas que colabora con FRANCISCO VICENTE TINAUT FLUIXA (23)

2021

  1. A correlation for turbulent combustion speed accounting for instabilities and expansion speed in a hydrogen-natural gas spark ignition engine

    Combustion and Flame, Vol. 223, pp. 15-27

  2. Influence of environmental changes due to altitude on performance, fuel consumption and emissions of a naturally aspirated diesel engine

    Energies, Vol. 14, Núm. 17

2019

  1. Optical characterization of hydrogen-air laminar combustion under cellularity conditions

    International Journal of Hydrogen Energy, Vol. 44, Núm. 25, pp. 12857-12871

2016

  1. Characterization of the combustion process and cycle-to-cycle variations in a spark ignition engine fuelled with natural gas/hydrogen mixtures

    International Journal of Hydrogen Energy, Vol. 41, Núm. 3, pp. 2064-2074

  2. PEMFC hybrid powertrain for railway vehicles

    WHEC 2016 - 21st World Hydrogen Energy Conference 2016, Proceedings

2014

  1. Modeling of fixed bed downdraft biomass gasification: Application on lab-scale and industrial reactors

    International Journal of Energy Research, Vol. 38, Núm. 3, pp. 319-338

2011

  1. Prediction of performance and emissions of an engine fuelled with natural gas/hydrogen blends

    International Journal of Hydrogen Energy, Vol. 36, Núm. 1, pp. 947-956

2010

  1. Characterization of the combustion of biomass producer gas in a constant volume combustion bomb

    Fuel, Vol. 89, Núm. 3, pp. 724-731

2008

  1. Effect of biomass particle size and air superficial velocity on the gasification process in a downdraft fixed bed gasifier. An experimental and modelling study

    Fuel Processing Technology, Vol. 89, Núm. 11, pp. 1076-1089

2007

  1. Misfire and compression fault detection through the energy model

    Mechanical Systems and Signal Processing, Vol. 21, Núm. 3, pp. 1521-1535

2006

  1. Method for predicting the performance of an internal combustion engine fuelled by producer gas and other low heating value gases

    Fuel Processing Technology

2004

  1. Effects of the operating variables and atomization parameters on diesel spray characteristics by means of a transient evaporative spray atomization model

    SAE Technical Papers

2000

  1. A method to determine the two components of the crankshaft load on a bearing cap in firing engines

    SAE Technical Papers

  2. Análisis de sistemas de reciclado y valorización de neumáticos usados

    Residuos: Revista técnica, Año 10, Núm. 56, pp. 88-93

  3. Considerations on the gas-phase velocity field in a nonevaporating diesel spray

    Automization and Sprays: Journal of the International Institutions for Liquid Atomization and Spray Systems, Vol. 10, Núm. 6, pp. 529-543

1999

  1. A model of atomization of a transient evaporative spray

    SAE Technical Papers

  2. Utilization of a quasi-dimensional model for predicting pollutant emissions in SI engines

    SAE Technical Papers

1998

  1. Thermal simulation of refrigeration control system in combustion engine test-bench

    INTELLIGENT COMPONENTS FOR VEHICLES

1997

  1. A method to determine liquid concentration in non-stationary axisymmetric sprays

    Experiments in Fluids, Vol. 23, Núm. 4, pp. 299-305

1995

  1. Estudio comparativo entre vehículos con motores eléctricos y vehículos con motores térmicos

    Energía: Ingeniería energética y medioambiental, Año 21, Núm. 3, pp. 97-104