Fundación para la Investigación y Desarrollo en Transporte y Energía-ko ikertzaileekin lankidetzan egindako argitalpenak (18)

2023

  1. Prediction of the flame kernel growth rate in spark ignition engine fueled with natural gas, hydrogen and mixtures

    Fuel, Vol. 339

2021

  1. A correlation for turbulent combustion speed accounting for instabilities and expansion speed in a hydrogen-natural gas spark ignition engine

    Combustion and Flame, Vol. 223, pp. 15-27

2019

  1. Performance prediction of a decentralized power plant (120 kWe) using a multi-particle model of a downdraft biomass gasification process

    Energy Conversion and Management, Vol. 181, pp. 258-271

2017

  1. Thermodynamic methodology to support the selection of feedstocks for decentralised downdraft gasification power plants

    International Journal of Sustainable Energy, Vol. 36, Núm. 10, pp. 1010-1028

2016

  1. Characterization of the combustion process and cycle-to-cycle variations in a spark ignition engine fuelled with natural gas/hydrogen mixtures

    International Journal of Hydrogen Energy, Vol. 41, Núm. 3, pp. 2064-2074

  2. PEMFC hybrid powertrain for railway vehicles

    WHEC 2016 - 21st World Hydrogen Energy Conference 2016, Proceedings

2014

  1. Modeling of fixed bed downdraft biomass gasification: Application on lab-scale and industrial reactors

    International Journal of Energy Research, Vol. 38, Núm. 3, pp. 319-338

2013

  1. Study of the cycle-to-cycle variations of an internal combustion engine fuelled with natural gas/hydrogen blends from the diagnosis of combustion pressure

    International Journal of Hydrogen Energy, Vol. 38, Núm. 35, pp. 15477-15487

2009

  1. Gasificación de biomasa en un reactor de lecho fijo en equicorriente: Un modelo de diagnóstico en tiempo real a partir de la composición del gas pobre

    Revista Facultad de Ingenieria, pp. 9-18

2008

  1. Effect of biomass particle size and air superficial velocity on the gasification process in a downdraft fixed bed gasifier. An experimental and modelling study

    Fuel Processing Technology, Vol. 89, Núm. 11, pp. 1076-1089

2007

  1. Diesel fuel processor for hydrogen production for 5 kW fuel cell application

    International Journal of Hydrogen Energy, Vol. 32, Núm. 10-11, pp. 1429-1436

  2. Misfire and compression fault detection through the energy model

    Mechanical Systems and Signal Processing, Vol. 21, Núm. 3, pp. 1521-1535

  3. Thermochemical equilibrium modelling of a gasifying process

    Energy Conversion and Management, Vol. 48, Núm. 1, pp. 59-67

2006

  1. A 5kw electrolyser/fuel cell system with hydrogen accumulation combined with a wind generator coupled to the electric grid

    16th World Hydrogen Energy Conference 2006, WHEC 2006

  2. Hydrogen production in a 5 kW diesel oxidative steam reformer

    16th World Hydrogen Energy Conference 2006, WHEC 2006

2004

  1. Theoretical and experimental methodology for the improvement of EGR-coolers design

    SAE Technical Papers

2000

  1. A method to determine the two components of the crankshaft load on a bearing cap in firing engines

    SAE Technical Papers

1999

  1. Utilization of a quasi-dimensional model for predicting pollutant emissions in SI engines

    SAE Technical Papers