Publicaciones en las que colabora con José Ignacio Velasco Perero (27)

2016

  1. Low density polyethylene/silica nanocomposite foams. Relationship between chemical composition, particle dispersion, cellular structure and physical properties

    European Polymer Journal, Vol. 81, pp. 173-185

2013

  1. Influence of foaming process on the structure-properties relationship of foamed LDPE/silica nanocomposites

    Composites Part B: Engineering, Vol. 48, pp. 40-50

2012

  1. Foaming behavior, cellular structure and physical properties of polybenzoxazine foams

    Polymers for Advanced Technologies, Vol. 23, Núm. 5, pp. 841-849

  2. Moulded polypropylene foams produced using chemical or physical blowing agents: Structure-properties relationship

    Journal of Materials Science, Vol. 47, Núm. 15, pp. 5680-5692

  3. Optical expandometry: A technique to analyze the expansion kinetics of chemically blown thermoplastic foams

    Journal of Applied Polymer Science, Vol. 125, Núm. 2, pp. 1059-1067

  4. Thermal conductivity anisotropy in polypropylene foams prepared by supercritical CO 2 dissolution

    Materials Chemistry and Physics, Vol. 136, Núm. 1, pp. 268-276

2011

  1. Heat transfer in polyolefin foams

    Advanced Structured Materials, Vol. 2, pp. 131-161

2010

  1. Foaming behavior, structure and physical properties of a novel benzoxazine resin

    Society of Plastics Engineers - FOAMS 2010, 8th International Conference on Foam Materials and Technology

  2. Heat transfer of mineral-filled polypropylene foams

    Defect and Diffusion Forum

  3. Structure and properties of Polypropylene/Hydrotalcite nanocomposites

    Polymer Composites, Vol. 31, Núm. 5, pp. 870-878

  4. The effect of anionic clay particles on the structure and thermomechanical behavior of sodium partially- Neutralized EMAA ionomer

    Journal of Applied Polymer Science, Vol. 116, Núm. 5, pp. 2573-2579

  5. Thermal conductivity of carbon nanofibre-polypropylene composite foams

    Defect and Diffusion Forum

2009

  1. Heat transfer in polypropylene-based foams produced using different foaming processes

    Advanced Engineering Materials, Vol. 11, Núm. 10, pp. 811-817

2007

  1. Foaming behaviour and cellular structure of LDPE/hectorite nanocomposites

    Polymer, Vol. 48, Núm. 7, pp. 2098-2108

  2. Foams based on low density polyethylene/ hectorite nanocomposites: Thermal stability and thermomechanical properties

    Journal of Applied Polymer Science, Vol. 105, Núm. 3, pp. 1658-1667

2006

  1. Polypropylene/clay nanocomposites: Combined effects of clay treatment and compatibilizer polymers on the structure and properties

    Journal of Applied Polymer Science, Vol. 102, Núm. 2, pp. 1213-1223

2005

  1. Dynamic mechanical behavior of PP/PET/MAPP blends filled with glass beads

    Macromolecular Symposia

2004

  1. Poly(propylene)/poly(ethylene terephthalate-co-isophthalate) blends and glass bead filled composites: Microstructure and thermomechanical properties

    Journal of Applied Polymer Science, Vol. 94, Núm. 4, pp. 1841-1852

2002

  1. The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection-moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 1. A wide-angle X-ray diffraction study

    Polymer, Vol. 43, Núm. 25, pp. 6805-6811

  2. The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection-moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 2. Thermal and dynamic mechanical properties

    Polymer, Vol. 43, Núm. 25, pp. 6813-6819