Publications dans lesquelles il/elle collabore avec M. Marcos-Fernández (20)

2018

  1. Partially pyrolized gas-separation membranes made from blends of copolyetherimides and polyimides

    European Polymer Journal, Vol. 103, pp. 390-399

  2. Thermally rearranged polybenzoxazoles made from poly(ortho-hydroxyamide)s. Characterization and evaluation as gas separation membranes

    Reactive and Functional Polymers, Vol. 127, pp. 38-47

2017

  1. Elimination of the Crystallinity of Long Polyethylene Oxide-Based Copolymers for Gas Separation Membranes by Using Electron Beam Irradiation

    Macromolecular Chemistry and Physics, Vol. 218, Núm. 5

2015

  1. Advances in the design of co-poly(ether-imide) membranes for CO2 separations. Influence of aromatic rigidity on crystallinity, phase segregation and gas transport

    European Polymer Journal, Vol. 62, pp. 130-138

2014

  1. Helium recovery by membrane gas separation using poly(o-acyloxyamide)s

    Industrial and Engineering Chemistry Research, Vol. 53, Núm. 32, pp. 12809-12818

  2. Prediction of gas permeability of block-segregated polymeric membranes by an effective medium model

    Journal of Membrane Science, Vol. 453, pp. 27-35

2013

  1. Gas separation properties of systems with different amounts of long poly(ethylene oxide) segments for mixtures including carbon dioxide

    International Journal of Greenhouse Gas Control, Vol. 12, pp. 146-154

  2. Influence of the PEO length in gas separation properties of segregating aromatic-aliphatic copoly(ether-imide)s

    Chemical Engineering Science, Vol. 104, pp. 574-585

  3. On the influence of the proportion of PEO in thermally controlled phase segregation of copoly(ether-imide)s for gas separation

    Journal of Membrane Science, Vol. 434, pp. 26-34

  4. Thermally segregated copolymers with PPO blocks for nitrogen removal from natural gas

    Industrial and Engineering Chemistry Research, Vol. 52, Núm. 11, pp. 4312-4322

2012

  1. Improving the permeation properties by plasma surface modification

    Procedia Engineering

  2. Influence of annealing temperature in permeation and plasticization resistance for samples containing carboxylic acid

    Procedia Engineering

  3. Phase segregation and gas separation properties of thermally treated copoly(ether-imide) from an aromatic dianhydride, an aromatic diamine, and various aliphatic diamines

    Industrial and Engineering Chemistry Research, Vol. 51, Núm. 9, pp. 3766-3775

  4. Thermally treated copoly(ether-imide)s made from bpda and alifatic plus aromatic diamines. GAS separation properties with different aromatic diamimes

    Journal of Membrane Science, Vol. 387-388, Núm. 1, pp. 54-65

2010

  1. Physical properties of films made of copoly(ether-imide)s with long poly(ethylene oxide) segments

    European Polymer Journal, Vol. 46, Núm. 12, pp. 2352-2364

2009

  1. 6FDA-6FpDA as a multipurpose polymer: Synthesis and influence of casting process on gas separation properties of ultrahigh MW 6FDA-6FpDA

    ACS National Meeting Book of Abstracts

  2. Scanning Probe Microscopy Techniques in the Investigation of Homogeneous and Heterogeneous Dense Membranes: The Case for Gas Separtion Membranes

    Monitoring and Visualizing Membrane-Based Processes (Wiley-VCH Verlag GmbH & Co. KGaA), pp. 77-103

2008

  1. Effect of fractional free volume and Tg on gas separation through membranes made with different glassy polymers

    Journal of Applied Polymer Science, Vol. 107, Núm. 2, pp. 1039-1046

2007

  1. Gas separation of 6FDA-6FpDA membranes. Effect of the solvent on polymer surfaces and permselectivity

    Journal of Membrane Science, Vol. 293, Núm. 1-2, pp. 22-28

2006

  1. Permeability and selectivity of 6FDA-6FpDA gas membranes prepared from different solvents

    Desalination, Vol. 200, Núm. 1-3, pp. 225-226