Publications dans lesquelles il/elle collabore avec MERCEDES SANTIAGO CALVO (22)

2023

  1. A new synthesis route to produce isocyanate-free polyurethane foams

    European Polymer Journal, Vol. 197

  2. Thermal conductivity aging and mechanical properties of polyisocyanurate (PIR) foams produced with different contents of HFO

    Journal of Applied Polymer Science, Vol. 140, Núm. 40, pp. 1-14

2022

  1. Characterization and Properties of Water-Blown Rigid Polyurethane Foams Reinforced with Silane-Modified Nanosepiolites Functionalized with Graphite

    Materials, Vol. 15, Núm. 1

  2. Role of Air Bubble Inclusion on Polyurethane Reaction Kinetics

    Materials, Vol. 15, Núm. 9

2021

  1. Analysis of the foaming window for thermoplastic polyurethane with different hard segment contents

    Polymers, Vol. 13, Núm. 18

  2. Dynamic Mechanical Analysis during polyurethane foaming: Relationship between modulus build-up and reaction kinetics

    Polymer Testing, Vol. 103

  3. Effect of the molecular structure of tpu on the cellular structure of nanocellular polymers based on pmma/tpu blends

    Polymers, Vol. 13, Núm. 18

2020

  1. Influence of silica aerogel particles on the foaming process and cellular structure of rigid polyurethane foams

    European Polymer Journal, Vol. 135

  2. Synergistic effect of expandable graphite and phenylphosphonic-aniline salt on flame retardancy of rigid polyurethane foam

    Polymer Degradation and Stability, Vol. 179

  3. Thermal conductivity of polyisocyanurate foams (PIR) produced using hydrofluoroolefins (HFOs) as blowing agents

    VI Jornadas de investigadoras de Castilla y León: la aventura de la ciencia y la tecnología (Fundación 3CIN), pp. 33

2019

  1. Identification and quantification of cell gas evolution in rigid polyurethane foams by novel GCMS methodology

    Polymers, Vol. 11, Núm. 7

  2. Impact of expandable graphite on flame retardancy and mechanical properties of rigid polyurethane foam

    Polymer Composites, Vol. 40, Núm. S2, pp. E1705-E1715

  3. Improvement of thermal and mechanical properties by control of formulations in rigid polyurethane foams from polyols functionalized with graphene oxide

    Journal of Applied Polymer Science, Vol. 136, Núm. 19

  4. Influence of the characteristics of expandable graphite on the morphology, thermal properties, fire behaviour and compression performance of a rigid polyurethane foam

    Polymers, Vol. 11, Núm. 1

  5. Long-term thermal conductivity of cyclopentane–water blown rigid polyurethane foams reinforced with different types of fillers

    Polymer International, Vol. 68, Núm. 10, pp. 1826-1835

  6. X-ray radioscopy validation of a polyol functionalized with graphene oxide for producing rigid polyurethane foams with improved cellular structures

    European Polymer Journal, Vol. 118, pp. 404-411

2018

  1. Evaluation of the thermal conductivity and mechanical properties of water blown polyurethane rigid foams reinforced with carbon nanofibers

    European Polymer Journal, Vol. 108, pp. 98-106

  2. Infrared expandometry: A novel methodology to monitor the expansion kinetics of cellular materials produced with exothermic foaming mechanisms

    Polymer Testing, Vol. 66, pp. 383-393

  3. The effects of functional nanofillers on the reaction kinetics, microstructure, thermal and mechanical properties of water blown rigid polyurethane foams

    Polymer, Vol. 150, pp. 138-149

2017

  1. Synthesis, characterization and physical properties of rigid polyurethane foams prepared with poly(propylene oxide) polyols containing graphene oxide

    European Polymer Journal, Vol. 97, pp. 230-240