Publications dans lesquelles il/elle collabore avec JOSE LUIS RUIZ HERRERO (15)

2019

  1. Anisotropic polypropylene cellular polymers filled with nanoclays: Microstructure and properties

    Polymer Composites, Vol. 40, pp. E526-E539

  2. Long-term thermal conductivity of cyclopentane–water blown rigid polyurethane foams reinforced with different types of fillers

    Polymer International, Vol. 68, Núm. 10, pp. 1826-1835

2018

  1. Evaluation of the thermal conductivity and mechanical properties of water blown polyurethane rigid foams reinforced with carbon nanofibers

    European Polymer Journal, Vol. 108, pp. 98-106

  2. The effects of functional nanofillers on the reaction kinetics, microstructure, thermal and mechanical properties of water blown rigid polyurethane foams

    Polymer, Vol. 150, pp. 138-149

2016

  1. Mechanical and thermal performance of concrete and mortar cellular materials containing plastic waste

    Construction and Building Materials, Vol. 104, pp. 298-310

  2. Rigid polyurethane foams with infused nanoclays: Relationship between cellular structure and thermal conductivity

    European Polymer Journal, Vol. 80, pp. 1-15

2008

  1. The effect of processing on the structure and properties of crosslinked closed cell polyethylene foams

    Cellular Polymers, Vol. 27, Núm. 3, pp. 179-200

2006

  1. Gas diffusion in polyolefin foams during creep tests. Effect on impact behaviour and recovery after creep

    Cellular Polymers, Vol. 25, Núm. 4, pp. 221-236

  2. Prediction of cushion curves for closed cell polyethylene-based foams. Part II: Experimental

    Cellular Polymers, Vol. 25, Núm. 3, pp. 159-175

  3. Sample size effect on the effective diffusion coefficients for the gas contained in closed-cell polyethylene-based foam subjected to compressive creep tests

    Journal of Applied Polymer Science, Vol. 99, Núm. 5, pp. 2204-2210

2005

  1. Characterization of polyethylene foams under compressive impact loading

    Materials Science Forum

  2. Design and construction of an instrumented falling weight impact tester to characterise polymer-based foams

    Polymer Testing, Vol. 24, Núm. 5, pp. 641-647

  3. Dynamic mechanical behavior of PP/PET/MAPP blends filled with glass beads

    Macromolecular Symposia

  4. Effective diffusion coefficient for the gas contained in closed cell polyethylene-based foams subjected to compressive creep tests

    Polymer, Vol. 46, Núm. 9, pp. 3105-3110

  5. Prediction of cushion curves for closed cell polyethylene-based foams. part I. Modelling

    Cellular Polymers, Vol. 24, Núm. 6, pp. 329-346