Publicacións nas que colabora con JUAN CARLOS MERINO SENOVILLA (21)

2024

  1. Biopolyamide composites for fused filament manufacturing: impact of fibre type on the microstructure and mechanical performance of printed parts

    Progress in Additive Manufacturing, Vol. 9, Núm. 4, pp. 857-874

  2. Structural health monitoring of composite laminates in thermoplastic induction welded joints using electromagnetic field technique

    Sensors and Actuators A: Physical, Vol. 375

2023

  1. Análisis numérico y experimental de las propiedades electromagnéticas para el estudio de la salud de las soldaduras por inducción de composites termoplásticos

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Vol. 125, Núm. 789

  2. Monitoring of thermoplastic induction welding defects. Use of electromagnetic properties as a predictive tool

    Structural Health Monitoring, Vol. 22, Núm. 3, pp. 1613-1627

  3. Thermoplastic Induction Welded Joint Design for Structural Health Monitoring Damage Detectability

    Structural Health Monitoring 2023: Designing SHM for Sustainability, Maintainability, and Reliability - Proceedings of the 14th International Workshop on Structural Health Monitoring

2022

  1. Estudio de poliamidas en configuración estrella para su uso como matriz en composites termoplásticos con alta capacidad de integración

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Vol. 123, Núm. 777

  2. Rheological Method for Determining the Molecular Weight of Collagen Gels by Using a Machine Learning Technique

    Polymers, Vol. 14, Núm. 17

  3. Star-Branched Polyamides as the Matrix in Thermoplastic Composites

    Polymers, Vol. 14, Núm. 5

2021

  1. Optimization of injection parameters to obtain selected properties on foamed PP with hollow glass microspheres and thermally expandable microspheres using Taguchi method

    Journal of Cellular Plastics, Vol. 57, Núm. 3, pp. 313-327

2020

  1. Control of branches distribution in linear PE copolymers using fibrillar nanoclay as support of catalyst system

    Polymer, Vol. 202

  2. Processing of pre-impregnated thermoplastic towpreg reinforced by continuous glass fibre and recycled PET by pultrusion

    Composites Part B: Engineering, Vol. 200

  3. Rheological modification of recycled poly(ethylene terephthalate): Blending and reactive extrusion

    Polymer Degradation and Stability, Vol. 179

  4. The Influence of Sepiolite Orientation and Concentration, on the Morphological, Thermal and Mechanical Properties of Bio-Polyamide 4.10 Nanocomposites

    Polymer Engineering and Science, Vol. 60, Núm. 5, pp. 1035-1043

2019

  1. Morphological, Thermal, and Mechanical Behavior of Polyamide11/Sepiolite Bio-Nanocomposites Prepared by Melt Compounding and In Situ Polymerization

    Polymer Composites, Vol. 40, pp. E704-E713

2018

  1. In situ polymerization of isotactic polypropylene sepiolite nanocomposites and its copolymers by metallocene catalysis

    European Polymer Journal, Vol. 100, pp. 278-289

  2. Renewable Nanocomposites for Additive Manufacturing Using Fused Filament Fabrication

    ACS Sustainable Chemistry and Engineering, Vol. 6, Núm. 9, pp. 12393-12402

  3. Sepiolite as replacement of short glass fibre in polyamide composites for injection moulding applications

    Applied Clay Science, Vol. 162, pp. 129-137

2016

  1. Control of molecular weight and polydispersity in polyethylene/needle-like shaped clay nanocomposites obtained by in situ polymerization with metallocene catalysts

    European Polymer Journal, Vol. 75, pp. 125-141

2014

  1. Synthesis of new compatibilizers to poly(lactic acid) blends

    Polymer Engineering and Science, Vol. 54, Núm. 3, pp. 522-530

  2. The structure of sepiolite as support of metallocene co-catalyst during in situ polymerization of polyolefin (nano)composites

    Applied Clay Science, Vol. 101, pp. 73-81