Publicacions en què col·labora amb VICTORIA BERNARDO GARCIA (41)

2023

  1. Evaluation of methods to accurately characterize the thermal conductivity of micro-and nanocellular polymers based on poly(methyl-methacrylate) (PMMA) produced at lab-scale

    Polymer Testing, Vol. 117

2022

  1. Methodology for measuring the thermal conductivity of insulating samples with small dimensions by heat flow meter technique

    Journal of Thermal Analysis and Calorimetry, Vol. 147, Núm. 22, pp. 12523-12533

  2. Micronization as a solution for enhancing the thermal insulation of nanocellular poly(methyl-methacrylate) (PMMA)

    Polymer, Vol. 261

  3. Thermal conductivity of low-density micro-and nanocellular poly(methyl-methacrylate) (PMMA): Experimental and modeling

    Materials and Design, Vol. 221

2021

  1. Analysis of the foaming window for thermoplastic polyurethane with different hard segment contents

    Polymers, Vol. 13, Núm. 18

  2. Cold neutron transmission for the in-situ analysis of the gas diffusion in polymers

    Journal of Supercritical Fluids, Vol. 177

  3. Cyclic gas dissolution foaming as an approach for simultaneously reducing cell size and relative density in nanocellular pmma

    Polymers, Vol. 13, Núm. 14

  4. Easy-way production of highly transparent nanocellular polymers films

    Polymer, Vol. 236

  5. Effect of the molecular structure of tpu on the cellular structure of nanocellular polymers based on pmma/tpu blends

    Polymers, Vol. 13, Núm. 18

  6. Nanostructure of PMMA/MAM blends prepared by out-of-equilibrium (Extrusion) and near-equilibrium (casting) self-assembly and their nanocellular or microcellular structure obtained from CO2 foaming

    Nanomaterials, Vol. 11, Núm. 11

  7. New non-destructive optical approach to determine the crystallization kinetics of PLA under a CO2 atmosphere with spatial and temporal resolution

    Polymer Testing, Vol. 98

  8. Novel approach based on autoclave bead foaming to produce expanded polycarbonate (EPC) bead foams with microcellular structure and controlled crystallinity

    Materials and Design, Vol. 212

2020

  1. Influence of the viscosity of poly(methyl methacrylate) on the cellular structure of nanocellular materials

    Polymer International, Vol. 69, Núm. 1, pp. 72-83

  2. Nanocellular Polymers with a Gradient Cellular Structure Based on Poly(methyl methacrylate)/Thermoplastic Polyurethane Blends Produced by Gas Dissolution Foaming

    Macromolecular Materials and Engineering, Vol. 305, Núm. 1

  3. On the interaction of infrared radiation and nanocellular polymers: First experimental determination of the extinction coefficient

    Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 600

  4. Two-Stage Depressurization in Gas Dissolution Foaming: The Production of Nanocellular Materials Free of Defects

    Macromolecular Materials and Engineering, Vol. 305, Núm. 9

2019

  1. Anisotropy in nanocellular polymers promoted by the addition of needle-like sepiolites

    Polymer International, Vol. 68, Núm. 6, pp. 1204-1214

  2. Highly anisotropic nanocellular polymers based on tri-phasic blends of PMMA with two nucleating agents

    Materials Letters, Vol. 255

  3. Low-density PMMA/MAM nanocellular polymers using low MAM contents: Production and characterization

    Polymer, Vol. 163, pp. 115-124

  4. Mechanical Properties of PMMA-Sepiolite Nanocellular Materials with a Bimodal Cellular Structure

    Macromolecular Materials and Engineering, Vol. 304, Núm. 7