Publicaciones en las que colabora con Cristina Saiz Arroyo (31)

2021

  1. Effect of the elastomer viscosity on the morphology and impact behavior of injection molded foams based on blends of polypropylene and polyolefin elastomers

    Journal of Applied Polymer Science, Vol. 138, Núm. 20

  2. Effect on the Impact Properties of Adding Long-Chain Branched Polypropylene in Polypropylene-Polyolefin Elastomer Cellular Polymers Produced by Core-Back Injection Molding

    Macromolecular Materials and Engineering, Vol. 306, Núm. 4

2020

  1. Effect of gas-phase tortuosity on the mechanical properties of low-density polyolefin open-cell foams at low- and high-strain rates

    Journal of Applied Polymer Science, Vol. 137, Núm. 11

  2. Foams with enhanced ductility and impact behavior based on polypropylene composites

    Polymers, Vol. 12, Núm. 4

  3. Low-density open-cell flexible polyolefin foams as efficient materials for oil absorption: influence of tortuosity on oil absorption

    International Journal of Environmental Science and Technology, Vol. 17, Núm. 3, pp. 1663-1674

2019

  1. Crosslinked ethylene butyl acrylate copolymer foams with different cellular structure interconnectivity and tortuosity: Microstructure and physical properties

    Journal of Applied Polymer Science, Vol. 136, Núm. 45

  2. Effect of mold temperature on the impact behavior and morphology of injection molded foams based on polypropylene polyethylene-octene copolymer blends

    Polymers, Vol. 11, Núm. 5

2017

  1. Low density open cell flexible foams with high tortuosities and mechanical properties highly dependent on the strain rate

    Annual Technical Conference - ANTEC, Conference Proceedings

2016

  1. Extensional rheology, cellular structure, mechanical behavior relationships in HMS PP/montmorillonite foams with similar densities

    Journal of Polymer Research, Vol. 23, Núm. 12

  2. Low density polyethylene/silica nanocomposite foams. Relationship between chemical composition, particle dispersion, cellular structure and physical properties

    European Polymer Journal, Vol. 81, pp. 173-185

2015

  1. Production of non-crosslinked thermoplastic foams with a controlled density and a wide range of cellular structures

    Journal of Applied Polymer Science, Vol. 132, Núm. 31

2014

  1. Extensional rheology: A tool to predict the foamability of complex systems such as polymer blends and recycled polymers

    Society of Plastics Engineers - 12th International Conference on Foam Materials and Technology, FOAMS 2014

2013

  1. AniCell. Low density and non-crossl1nked polypropylene foams as a promising option to produce structural panels

    Society of Plastics Engineers - EUROTECH 2013

  2. Influence of foaming process on the structure-properties relationship of foamed LDPE/silica nanocomposites

    Composites Part B: Engineering, Vol. 48, pp. 40-50

  3. Low density open-cell crosslinked ldpe foams: A study on the structure-properties relationship

    Society of Plastics Engineers - EUROTECH 2013

  4. Structure-property relationships of medium-density polypropylene foams

    Polymer International, Vol. 62, Núm. 9, pp. 1324-1333

2012

  1. Fabricación de materiales celulares mejorados basados en poliolefinas. Relación procesado-composición-estructura-propiedades

    Fabricación de materiales celulares mejorados basados en poliolefinas. Relación procesado-composición-estructura-propiedades

  2. Moulded polypropylene foams produced using chemical or physical blowing agents: Structure-properties relationship

    Journal of Materials Science, Vol. 47, Núm. 15, pp. 5680-5692

  3. Optical expandometry: A technique to analyze the expansion kinetics of chemically blown thermoplastic foams

    Journal of Applied Polymer Science, Vol. 125, Núm. 2, pp. 1059-1067

  4. Production and Characterization of crosslinked low-density polyethylene foams using waste of foams with the same composition

    Polymer Engineering and Science, Vol. 52, Núm. 4, pp. 751-759