ESCUELA DE INGENIERIAS INDUSTRIALES
Centre
Fundación para la Investigación y Desarrollo en Transporte y Energía
Boecillo, EspañaPublications en collaboration avec des chercheurs de Fundación para la Investigación y Desarrollo en Transporte y Energía (106)
2024
-
Thermodynamic (p, ρ, T) characterization of a reference high-calorific natural gas mixture when hydrogen is added up to 20 % (mol/mol)
International Journal of Hydrogen Energy, Vol. 70, pp. 118-135
2023
-
Biopolyamide composites for fused filament manufacturing: impact of fibre type on the microstructure and mechanical performance of printed parts
Progress in Additive Manufacturing
-
Cooperative Effect of Chemical and Physical Processes for Flame Retardant Additives in Recycled ABS
Polymers, Vol. 15, Núm. 11
-
Performance Evaluation of a Fuel Cell mCHP System under Different Configurations of Hydrogen Origin and Heat Recovery
Energies, Vol. 16, Núm. 18
-
Prediction of the flame kernel growth rate in spark ignition engine fueled with natural gas, hydrogen and mixtures
Fuel, Vol. 339
-
Sitting posture influence in autonomous vehicles for the evaluation of occupant safety in side impact
Safety Science, Vol. 159
-
Thermoplastic Induction Welded Joint Design for Structural Health Monitoring Damage Detectability
Structural Health Monitoring 2023: Designing SHM for Sustainability, Maintainability, and Reliability - Proceedings of the 14th International Workshop on Structural Health Monitoring
2022
-
In situ polymerisation of stereospecific propylene nanocomposites blends. Optimising mechanical properties
Polymer, Vol. 240
-
Rheological Method for Determining the Molecular Weight of Collagen Gels by Using a Machine Learning Technique
Polymers, Vol. 14, Núm. 17
-
Star-Branched Polyamides as the Matrix in Thermoplastic Composites
Polymers, Vol. 14, Núm. 5
2021
-
A correlation for turbulent combustion speed accounting for instabilities and expansion speed in a hydrogen-natural gas spark ignition engine
Combustion and Flame, Vol. 223, pp. 15-27
-
Alternative Technologies for V2I Communication
Lecture Notes in Mobility (Springer Science and Business Media Deutschland GmbH), pp. 14-25
-
Optimization of injection parameters to obtain selected properties on foamed PP with hollow glass microspheres and thermally expandable microspheres using Taguchi method
Journal of Cellular Plastics, Vol. 57, Núm. 3, pp. 313-327
2020
-
Analysis of low cost communication technologies for V2I applications
Applied Sciences (Switzerland), Vol. 10, Núm. 4
-
Control of branches distribution in linear PE copolymers using fibrillar nanoclay as support of catalyst system
Polymer, Vol. 202
-
Mechanical and microstructural evaluation of high performance steel (S700MC) for road restraint systems
Engineering Failure Analysis, Vol. 108
-
Processing of pre-impregnated thermoplastic towpreg reinforced by continuous glass fibre and recycled PET by pultrusion
Composites Part B: Engineering, Vol. 200
-
Rheological modification of recycled poly(ethylene terephthalate): Blending and reactive extrusion
Polymer Degradation and Stability, Vol. 179
-
The Influence of Sepiolite Orientation and Concentration, on the Morphological, Thermal and Mechanical Properties of Bio-Polyamide 4.10 Nanocomposites
Polymer Engineering and Science, Vol. 60, Núm. 5, pp. 1035-1043
2019
-
Morphological, Thermal, and Mechanical Behavior of Polyamide11/Sepiolite Bio-Nanocomposites Prepared by Melt Compounding and In Situ Polymerization
Polymer Composites, Vol. 40, pp. E704-E713