Publicacions en col·laboració amb investigadors/es de Fundación para la Investigación y Desarrollo en Transporte y Energía (62)

2023

  1. Biopolyamide composites for fused filament manufacturing: impact of fibre type on the microstructure and mechanical performance of printed parts

    Progress in Additive Manufacturing

  2. Cooperative Effect of Chemical and Physical Processes for Flame Retardant Additives in Recycled ABS

    Polymers, Vol. 15, Núm. 11

  3. Life cycle assessment applied to a self-healing elastomer filled with ground tire rubber

    Journal of Cleaner Production, Vol. 419

  4. Thermoplastic Induction Welded Joint Design for Structural Health Monitoring Damage Detectability

    Structural Health Monitoring 2023: Designing SHM for Sustainability, Maintainability, and Reliability - Proceedings of the 14th International Workshop on Structural Health Monitoring

2022

  1. Design of self-healing styrene-butadiene rubber compounds with ground tire rubber-based reinforcing additives by means of DoE methodology

    Materials and Design, Vol. 221

  2. In situ polymerisation of stereospecific propylene nanocomposites blends. Optimising mechanical properties

    Polymer, Vol. 240

  3. Rheological Method for Determining the Molecular Weight of Collagen Gels by Using a Machine Learning Technique

    Polymers, Vol. 14, Núm. 17

  4. Setting relationships between structure and devulcanization of ground tire rubber and their effect on self-healing elastomers

    Polymers, Vol. 14, Núm. 1

  5. Star-Branched Polyamides as the Matrix in Thermoplastic Composites

    Polymers, Vol. 14, Núm. 5

2021

  1. Optimization of injection parameters to obtain selected properties on foamed PP with hollow glass microspheres and thermally expandable microspheres using Taguchi method

    Journal of Cellular Plastics, Vol. 57, Núm. 3, pp. 313-327

2020

  1. Control of branches distribution in linear PE copolymers using fibrillar nanoclay as support of catalyst system

    Polymer, Vol. 202

  2. Processing of pre-impregnated thermoplastic towpreg reinforced by continuous glass fibre and recycled PET by pultrusion

    Composites Part B: Engineering, Vol. 200

  3. Rheological modification of recycled poly(ethylene terephthalate): Blending and reactive extrusion

    Polymer Degradation and Stability, Vol. 179

  4. The Influence of Sepiolite Orientation and Concentration, on the Morphological, Thermal and Mechanical Properties of Bio-Polyamide 4.10 Nanocomposites

    Polymer Engineering and Science, Vol. 60, Núm. 5, pp. 1035-1043

2019

  1. Morphological, Thermal, and Mechanical Behavior of Polyamide11/Sepiolite Bio-Nanocomposites Prepared by Melt Compounding and In Situ Polymerization

    Polymer Composites, Vol. 40, pp. E704-E713

2018

  1. In situ polymerization of isotactic polypropylene sepiolite nanocomposites and its copolymers by metallocene catalysis

    European Polymer Journal, Vol. 100, pp. 278-289

  2. Renewable Nanocomposites for Additive Manufacturing Using Fused Filament Fabrication

    ACS Sustainable Chemistry and Engineering, Vol. 6, Núm. 9, pp. 12393-12402

  3. Sepiolite as replacement of short glass fibre in polyamide composites for injection moulding applications

    Applied Clay Science, Vol. 162, pp. 129-137

2017

  1. Lightweighting and passive safety for urban electric vehicle

    2017 Electric Vehicles International Conference, EV 2017

2016

  1. Control of molecular weight and polydispersity in polyethylene/needle-like shaped clay nanocomposites obtained by in situ polymerization with metallocene catalysts

    European Polymer Journal, Vol. 75, pp. 125-141