Ciencia e Ingeniería de los Materiales y del Estado Sólido (CIMES)
![Foto de Ciencia e Ingeniería de los Materiales y del Estado Sólido (CIMES)](/img/uploaded/E047A4AFB3DCEB503667AA7DEE30D560.png)
![Foto de Fundación para la Investigación y Desarrollo en Transporte y Energía](/img/noimage_org.png)
Fundación para la Investigación y Desarrollo en Transporte y Energía
Boecillo, EspañaPublikationen in Zusammenarbeit mit Forschern von Fundación para la Investigación y Desarrollo en Transporte y Energía (62)
2024
-
Biopolyamide composites for fused filament manufacturing: impact of fibre type on the microstructure and mechanical performance of printed parts
Progress in Additive Manufacturing, Vol. 9, Núm. 4, pp. 857-874
2023
-
Cooperative Effect of Chemical and Physical Processes for Flame Retardant Additives in Recycled ABS
Polymers, Vol. 15, Núm. 11
-
Life cycle assessment applied to a self-healing elastomer filled with ground tire rubber
Journal of Cleaner Production, Vol. 419
-
Thermoplastic Induction Welded Joint Design for Structural Health Monitoring Damage Detectability
Structural Health Monitoring 2023: Designing SHM for Sustainability, Maintainability, and Reliability - Proceedings of the 14th International Workshop on Structural Health Monitoring
2022
-
Design of self-healing styrene-butadiene rubber compounds with ground tire rubber-based reinforcing additives by means of DoE methodology
Materials and Design, Vol. 221
-
In situ polymerisation of stereospecific propylene nanocomposites blends. Optimising mechanical properties
Polymer, Vol. 240
-
Rheological Method for Determining the Molecular Weight of Collagen Gels by Using a Machine Learning Technique
Polymers, Vol. 14, Núm. 17
-
Setting relationships between structure and devulcanization of ground tire rubber and their effect on self-healing elastomers
Polymers, Vol. 14, Núm. 1
-
Star-Branched Polyamides as the Matrix in Thermoplastic Composites
Polymers, Vol. 14, Núm. 5
2021
-
Optimization of injection parameters to obtain selected properties on foamed PP with hollow glass microspheres and thermally expandable microspheres using Taguchi method
Journal of Cellular Plastics, Vol. 57, Núm. 3, pp. 313-327
2020
-
Control of branches distribution in linear PE copolymers using fibrillar nanoclay as support of catalyst system
Polymer, Vol. 202
-
Processing of pre-impregnated thermoplastic towpreg reinforced by continuous glass fibre and recycled PET by pultrusion
Composites Part B: Engineering, Vol. 200
-
Rheological modification of recycled poly(ethylene terephthalate): Blending and reactive extrusion
Polymer Degradation and Stability, Vol. 179
-
The Influence of Sepiolite Orientation and Concentration, on the Morphological, Thermal and Mechanical Properties of Bio-Polyamide 4.10 Nanocomposites
Polymer Engineering and Science, Vol. 60, Núm. 5, pp. 1035-1043
2019
-
Morphological, Thermal, and Mechanical Behavior of Polyamide11/Sepiolite Bio-Nanocomposites Prepared by Melt Compounding and In Situ Polymerization
Polymer Composites, Vol. 40, pp. E704-E713
2018
-
In situ polymerization of isotactic polypropylene sepiolite nanocomposites and its copolymers by metallocene catalysis
European Polymer Journal, Vol. 100, pp. 278-289
-
Renewable Nanocomposites for Additive Manufacturing Using Fused Filament Fabrication
ACS Sustainable Chemistry and Engineering, Vol. 6, Núm. 9, pp. 12393-12402
-
Sepiolite as replacement of short glass fibre in polyamide composites for injection moulding applications
Applied Clay Science, Vol. 162, pp. 129-137
2017
-
Lightweighting and passive safety for urban electric vehicle
2017 Electric Vehicles International Conference, EV 2017
2016
-
Control of molecular weight and polydispersity in polyethylene/needle-like shaped clay nanocomposites obtained by in situ polymerization with metallocene catalysts
European Polymer Journal, Vol. 75, pp. 125-141