Publicaciones en las que colabora con JOSE ANTONIO DE SAJA SAEZ (15)

2012

  1. Monitoring of evolution during red wine aging in oak barrels and alternative method by means of an electronic panel test

    Food Research International, Vol. 45, Núm. 1, pp. 244-249

2010

  1. Application of an electronic tongue to study the effect of the use of pieces of wood and micro-oxygenation in the aging of red wine

    Electrochimica Acta, Vol. 55, Núm. 22, pp. 6782-6788

  2. Seguimiento de la crianza por un panel de cata electrónico

    La Semana vitivinícola, Núm. 3295, pp. 118-123

2008

  1. Efecto del tostado de la madera de roble en la estabilidad del color de los vinos tintos

    Trabajos presentados con motivo del VI Foro Mundial del Vino: [recurso electrónico]. La Rioja, 2008

  2. Seguimiento de la crianza de un vino por medio de un panel de cata (nariz+ lengua+ojo) electrónico: discriminación entre sistema tradicional de crianza y métodos alternativos (chips)

    Trabajos presentados con motivo del VI Foro Mundial del Vino: [recurso electrónico]. La Rioja, 2008

2007

  1. Monitoring the ageing of red wines by means of an electronic panel test: discrimination between traditional and alternative ageing methods

    Bulletin de l' OIV: Revue Internatione de Viticulture, Oenologie, Economie, Droit Viti-Vinicole, Vol. 80, Núm. 911, pp. 47-59

  2. Using an e-tongue based on voltammetric electrodes to discriminate among red wines aged in oak barrels or aged using alternative methods. Correlation between electrochemical signals and analytical parameters

    Electrochimica Acta, Vol. 52, Núm. 7, pp. 2588-2594

1997

  1. Activity of substrates in the catalyzed nucleation of poly(ethylene terephthalate) melts

    Journal of Applied Polymer Science, Vol. 63, Núm. 3, pp. 349-353

  2. Activity of substrates in the catalyzed nucleation of poly(ethylene terephthalate) melts

    Journal of Applied Polymer Science, Vol. 63, Núm. 3, pp. 349-353

  3. Constrained crystallization and activity of filler in surface modified talc polypropylene composites

    European Polymer Journal, Vol. 33, Núm. 3, pp. 255-262

1995

  1. A non-isothermal differential scanning calorimetry method for the determination of specific surface energies in polymer crystals

    Thermochimica Acta, Vol. 258, Núm. C, pp. 197-204

  2. Morphology and tensile properties of compression-moulded talc-filled polypropylene

    Plastics, Rubber and Composites Processing and Applications, Vol. 24, Núm. 3, pp. 131-137

1993

  1. On the morphology of compression-moulded isotactic polypropylene filled with talc

    Plastics, Rubber and Composites Processing and Applications, Vol. 20, Núm. 3, pp. 165-170

1992

  1. Air-borne sound absorption and sound speed in talc-filled polypropylene

    Polymer Testing, Vol. 11, Núm. 1, pp. 71-78

1991

  1. Quality control of mineral impurities in industnal talcs by thermogravimetric analysis

    Thermochimica Acta, Vol. 184, Núm. 1, pp. 125-130